First, the use environment requirements of the slitter are as follows:
The machine should be installed in the place with proper temperature, dry, ventilated, good light and convenient operation. In addition, in daily use, should keep the use of clean environment, but also often clean the machine, keep clean.
Second, the operation requirements of the slitter are as follows:
It is necessary to use high-quality longitudinal and transverse cutters; the machine is required to cut the whole coil or sheet of raw materials in a fixed length; the control of the machine's fixed length cutting should be divided into static and dynamic cutting; the most important performance index of the machine's fixed length cutting is the cutting accuracy, and the length of the finished product is consistent; the cutting length of the machine can be set continuously, and if there is an error in the actual cutting length, it needs to be adjusted Calibration by setting parameters.
Third, the use of slitter precautions:
Before starting the machine, ensure that the voltage, current and hydraulic equivalent are correct and stable; before the machine is ready for operation, all personnel must be informed to leave to ensure personal safety before starting the machine for operation; when the machine is running, do not touch the running film coil or roller core with hands to avoid personal injury caused by hand involvement; during operation, do not scratch or cut the roller core of the machine with knives or hard objects.
Fourth, the use of slitter maintenance:
The electrical parts should be inspected and cleaned frequently, and hidden dangers should be removed in time; the rotating parts should be inspected, cleaned and lubricated irregularly, especially the vulnerable parts should be inspected and replaced frequently; the fasteners of the machine should be ensured not to be loose; the sliding parts of the machine should be ensured to be in good condition.
The above small series from the use of the environment, operating requirements, precautions, maintenance of these four aspects to do a simple introduction.
In addition to the above four aspects of basic requirements, the use of slitter in daily use should also improve the safety awareness and technical level of operators, and carry out comprehensive overhaul and maintenance of the machine regularly to improve production efficiency.
