Application: suitable for cutting BOPP / PVC / PE / masking paper / imported high-grade double-sided tape / kraft paper tape / conductive foam tape / cloth base / industrial tape, etc. characteristic:
1. Host drive part: using Taiwan AC motor with inverter as coil cutting material drive, stable and fast acceleration and deceleration.
2. Central control unit: the program can be used for central control, and multiple sizes (up to 20 modes) can be set in the coaxial line for one-time automatic conversion cutting, so as to achieve automatic completion of unmanned operation.
3. Operation panel: the 10.4-inch touch screen of Taiwan wellen LCD is used as the operation interface, which can directly set various cutting conditions and operation conditions on the screen.
4. Motor control system: the central control system is PLC programmable controller, which can set a variety of sizes in the coaxial, and the computer can automatically adjust the cutting width when cutting.
5. Roll cutting positioning system: controlled by Japanese and European brand servo motors, high-precision imported ball screw for size positioning and linear sliding rail bearing cutter seat, the positioning action is accurate and smooth.
6. Feed positioning system: servo motors of Japanese and European brands are used to control the feed mode. It can simulate the three-stage speed feed and cut roll, improve efficiency and get the best quality.
7. Automatic angle adjustment of round knife: use servo motors of Japanese and European brands to calculate the angle steering of round knife, and make different angle changes according to different materials (angle adjustment range ± 8 °). When the cutting plane is not good, the cutting angle can be directly changed, which can reduce the number of tool changes, avoid the trouble of manual angle adjustment, and greatly improve the production efficiency.
8. Quick axis changing device: This machine has two kinds of cutting shafts to choose from. The quick axis changing method is adopted to meet the needs of different materials.
9. (optional) a large safety cover is installed, which greatly improves the safety performance of machine operation.
Main technical parameters:
Machine width 1.0m 1.3m 1.6m
The cutting accuracy is ± 0.1 mm
The maximum coil cutting diameter is 150-220mm
The minimum cut width is 1 mm
Diameter of round knife: Φ 180-250mm
