Operating procedures of belt Slitter
Belt slitter is a kind of equipment that paper mills often need to use. It can be used to cut the belt. This equipment can be regarded as a necessary equipment for paper mills every day, so its operation and setting must be regulated. Only in this way can we protect ourselves safely. So how to operate the belt Slitter correctly? What should we pay attention to in the process of use?
Safe operation procedures for setting and control of belt Slitter:
1. Set the slitting menu according to the film type, thickness, length and width arranged in the slitting plan.
2. Bring up the corresponding BOPP film file from the PDF.
3. Set the length and width of the corresponding film.
4. Select the corresponding winding station, adjust the pressure roller arm and pressure roller, and install the paper core of corresponding specifications.
5. In the process of slitting operation, carefully monitor and observe the slitting effect, and properly adjust and control the slitting speed, unwinding tension, contact pressure, arc roll, edge material traction roll, guide edge, etc.
6. Material receiving
1. When the machine stops running after the inner and outer ends are wound up, use the film unloading button to put the film on the prepared film unloading trolley, cut the film and paste the film coil with sealing glue.
2. Use the collet release button to release the clamping head, and check whether the paper core of each film coil leaves the paper core. If one end is still stuck on the paper core, manually remove the film coil.
3. Make sure that all the films are put on the trolley after leaving the collet, use the film loading button to raise the winding arm, install the corresponding paper core, and stick the film on the paper core neatly for the next slitting.
7. Stop
1. When the film coil runs to the set length, the equipment stops automatically.
2. During the operation of the equipment, it can be stopped according to machine stop.
3. When it needs to stop quickly, press the machine stop key for more than 2S.
4. In case of emergency such as equipment or man-made accident, press emergency stop.
8. Precautions
1. Ensure that the voltage, current and hydraulic equivalent are correct and stable before startup.
2. Before the equipment is ready for operation, all personnel must be informed to leave the equipment to ensure personal safety.
3. When the slitter is in operation, do not touch the film roll or roll core with your hand, so as to avoid personal injury caused by hand rolling.
4. In the process of operation, do not scratch or cut the roller core with knife or hard object.
